Data sheetFIELDS OF USE
Suitable for both indoor and outdoor wood. It is recommended to use coloured LidoLegno for outdoor use as its transparent iron oxides reduce the absorption of solar radiation and limit damage caused by the destructive action of UV light. The coloured version is also suitable for improving the appearance of inexpensive or discoloured wood. For a softer and more satiny finish, apply a top coat of LIDOLEGNO VERNICE to provide additional protection in the form of a non-peeling film.
APPLICATION
On new wood: sand lightly and remove the dust. Remove any traces of resin using our
thinner 090.000.
On treated wood: lightly sand any previous layers of wood stain and remove the dust. If you have to treat surfaces that have previously been treated with paints or enamels, expose the bare wood to allow the product to penetrate more easily.
The product is ready to use. Mix thoroughly using a paint stir stick, especially if coloured. Apply the first coat following the grain of the wood and after a few hours lightly sand the surface; remove the dust then apply a second coat. Apply to dry substrate, at a temperature above 15°C and a relative humidity of less than 70%. For very exposed outdoor surfaces, it is recommended to apply a third coat.
Any drops and tools should be cleaned immediately with water.
